Update README.md

README.md

@@ -1,7 +1,7 @@
 # AFRS
 [![CC BY-NC-SA 4.0][cc-by-nc-sa-shield]][cc-by-nc-sa]
 
-Just a fun side electronic project, an Automatic Fishing Reel Spooler
+Just a fun side electronic project, an Automatic Fishing Reel Spooler(not for when you are on the lake, but before when you are putting line on the fishing reel).
 
 ## Software Used
 
@@ -9,9 +9,33 @@ Just a fun side electronic project, an Automatic Fishing Reel Spooler
 - [OrcaSlicer](https://orcaslicer.com/)
 - [Blender](https://www.blender.org/)
 
+## Library Used
+- LittleFS
+- AccelStepper
+- ArduinoJson
+- Wifi
+- Webserver
+
 ## Concept Picture
 ![alt text](https://github.com/josefswadijohansson/AFRS/blob/main/Concept%20pictures/v3/AFRS_concept_v3.png)
 
+## Components used
+
+- 2x ESP32-C3 Mini development boards
+- 2x Small "Pancake" variants of Nema 17
+- 2x TMC2208 Driver module
+- 150mm T8 Leadscrew
+- 100mm Linear rail
+- 3.3v Small laser guide
+- 2x Push buttons acting as limit switches
+
+## Improvements and fixes
+
+- For the fishing line distance measuring, i was planning on having a measuring wheel with magnets glued to them, and when fishing line was reeled on to the new fishing reel it would spin and activate a hall sensor and for each pulse a distance would be added to the counting, issue is when i had printed the measuring wheel and then glued magnets, i realised that the hall sensor only activated on one polarity, which i didn't know. To not have this issue blocking the development of the webserver i instead removed and put that part of the project in pause for later testing and adding in later. So in the future i want the user to be able to set a X amount of meters of line to be only feed to the reel via the webserver interface.
+- For now it uses TCP communication, issue is that since status update is wanted on the webserver to know the device position and state, TCP is a bit blocking on the ESP32, meaning i would prefer to maybe use UDP or some other communcation type to not block the device but to know the status of the device in the future.
+- Could make the webserver interface better looking and user friendly, for now it's in the most basic form, issue i wanted to reduce file size since i had limited 400kb memory on the ESP32-C3
+- Instead of hosting a webserver i could develop a desktop .NET program that talks to the ESP32-C3 devices
+
 ## License
 
 This work is licensed under a